- Gate Valve >
- Globe Valve >
- Check Valve >
- Ball Valve >
- Plug Valve >
- Steel Strainer
- Quality Control
- Service Online
- Valve Blog
- Contact Us
◆ Cast Steel Floating Ball Valve
◆ Forged Steel Floating Ball Valve
◆ Cast Steel Trunnion Ball Valve
◆ Forged Steel Trunnion Ball Valve
◆ Welded Structure Ball Valve
◆ Top Entry Ball Valve
◆ Concentric Type Butterfly Valve
◆ Double Eccentric Butterfly Valve
◆ Triple Offset Butterfly Valve
◆ Cast Steel Gate Valve
◆ Pressure Seal Gate Valve
◆ Throught Conduit Gate Valve
◆ Forged Steel Gate Valve
◆ Cast Steel Globe Valve
◆ Pressure Seal Globe Valve
◆ Forged Steel Globe Valve
◆ Cast Steel Swing Check Valve
◆ Pressure Seal Check Valve
◆ Dual Plate Wafer Check Valve
◆ Forged Steel Check Valve
◆ Sleeve Soft Sealing Plug Valve
◆ Inverted Pressure Balance Lubricated Plug Valve
◆ Steel Strainer
We usually make API 6D sleeve soft sealing plug valve and inverted pressure balance lubricated plug valve. Please contact us for more.
Plug valves are valves with cylindrical or conically-tapered "plugs" which can be rotated inside the valve body to control flow through the valve. The plugs in plug valves have one or more hollow passageways going sideways through the plug, so that fluid can flow through the plug when the valve is open. Plug valves are simple and often economical.
When the plug is conically-tapered, the stem/handle is typically attached to the larger diameter end of the plug. Plug valves usually do not have bonnets but often have the end of the plug with the handle exposed or mostly exposed to the outside. In cases like that, there is usually not much of a stem. The stem and handle often come in one piece, often a simple, approximately L-shaped handle attached to the end of the plug. The other end of the plug is often exposed to the outside of the valve too, but with a mechanism which retains the plug in the body.
The simplest and most common general type of plug valve is a 2-port valve, which has two positions, open to allow flow, and shut (closed) to stop flow. Ports are openings in the valve body through which fluid can enter or leave. The plug in this kind of valve has one passageway going through it. The ports are typically at opposite ends of the body; therefore, the plug is rotated a fourth of a full turn to change from open to shut positions. This makes this kind of plug valve a quarter-turn valve. There is often a mechanism limiting motion of the handle to a quarter turn, but not in glass stopcocks.
Slightly conically-tapered metal (often brass) plug valves are often used as simple shut-off valves in household natural gas lines.
China Butterfly Valve Manufacturer - www.chinavalve.info
Address: Sanqiao Industrial Zone, Oubei Town, Yongjia County, Zhejiang Province, China. Zip Code: 325102
Tel: +86-577-67279881 Fax: +86-577-67279880 Email: email@example.com
Copyright © 2011 Chinese Valve Manufacturer All rights reserved.